I get commissions for purchases made through links in this post.
Replacing a water heater is a significant home improvement project that can help ensure a continuous supply of hot water. Whether your current water heater is old, inefficient, or broken, replacing it with a new one can improve energy efficiency and reliability. If you’re up for the challenge, here’s a step-by-step guide on how to replace your water heater.
1. Choose the Right Replacement Water Heater
Before you begin, research the right type of water heater for your home. There are two main types to consider:
- Tank Water Heaters: These are the traditional models that store a large volume of hot water.
- Tankless Water Heaters: These units heat water on demand, offering greater energy efficiency and saving space.
Consider factors like the size of your household, water usage, and energy efficiency ratings when making your choice. You’ll also need to ensure the new water heater fits in the available space and is compatible with your current plumbing and electrical or gas connections.
2. Gather the Necessary Tools and Materials
Before you start the installation, gather the necessary tools and materials, including:
- Adjustable wrench
- Pipe wrench
- Screwdriver
- Garden hose (for draining the old water heater)
- Teflon tape
- Pipe insulation (optional)
- New water heater (of course!)
- Replacement parts (if needed)
- Water heater installation kit (often comes with the new unit)
3. Turn Off the Power Supply and Water Supply
Safety is the first priority. Start by turning off the power to the water heater. If it’s an electric water heater, turn off the circuit breaker. If it’s a gas water heater, turn off the gas supply. Additionally, turn off the main water supply to prevent water from flowing while you work.
4. Drain the Old Water Heater
To remove the old water heater, you’ll need to drain it first. Attach a garden hose to the drain valve at the bottom of the tank, and direct the hose to a floor drain or outside. Open the valve and allow the water to fully drain out. This can take some time, so be patient.
Once drained, open a hot water faucet in your home to relieve any pressure remaining in the tank.
5. Disconnect the Water Heater
Once the tank is empty, disconnect the inlet and outlet pipes (these are usually connected with threaded fittings). Use an adjustable wrench or pipe wrench to loosen the connections. If your water heater is a gas model, disconnect the gas line from the heater as well. If it’s electric, disconnect the electrical wires from the heater’s terminals.
Be sure to label the pipes and wires or take photos of the connections so you can correctly reconnect them later.
6. Remove the Old Water Heater
Once all connections are disconnected, you should be able to move the old water heater out of place. These units can be heavy, so you might need help to lift and remove the tank.
7. Install the New Water Heater
Now it’s time to install the new unit. Begin by placing the new water heater in the same position as the old one, ensuring it’s level and stable. You may need to adjust the height if the new model has a different configuration than the old one.
8. Connect the Water Lines
Once the new heater is in place, reconnect the cold and hot water lines to the new unit. Use Teflon tape on the threads to ensure a watertight seal and tighten the connections with your pipe wrench.
If your new water heater has a different size or type of inlet/outlet connections, you may need to use adapters or make adjustments to the plumbing.
9. Reconnect the Gas or Electrical Supply
If you have a gas water heater, reconnect the gas line to the new unit. Be sure to follow all safety guidelines for working with gas lines. If it’s an electric water heater, connect the wiring to the appropriate terminals on the heater. Double-check all connections to ensure they are tight and secure.
10. Fill the Tank and Check for Leaks
Before turning the power or gas back on, open the cold water supply valve to fill the tank. Allow the tank to fill completely, and keep an eye on all the connections to check for leaks. If you spot any, turn off the water supply and tighten the connections as needed.
11. Turn On the Power or Gas
Once you’re sure there are no leaks, turn on the power supply if you’re using an electric heater, or turn the gas valve on if you’re using a gas heater. If it’s an electric model, turn the circuit breaker back on.
12. Set the Temperature
Adjust the temperature setting on your new water heater to the desired level. The recommended setting is typically 120°F (49°C) to prevent scalding and improve energy efficiency.
13. Test the Water Heater
Now that everything is connected and powered on, it’s time to test the water heater. Open a hot water faucet in your home and allow the water to flow for a few minutes to ensure it’s heating properly. Check for leaks once again while the water is running.
14. Insulate the Water Heater (Optional)
If you live in an area with cold winters, consider insulating your new water heater to improve energy efficiency. This can be done by wrapping the tank with a water heater insulation blanket. Insulation will help retain heat, reducing energy consumption.
Conclusion
Replacing a water heater is a manageable DIY project if you’re comfortable working with plumbing and electrical or gas lines. By following this step-by-step guide, you can save money on professional installation while upgrading to a more efficient unit. Always prioritize safety, and if you’re unsure about any aspect of the installation, don’t hesitate to call a professional to help.