I get commissions for purchases made through links in this post.
Water damage can be one of the most costly and disruptive issues a homeowner can face. Whether it’s a burst pipe, a slow leak, or a malfunctioning water heater, water damage can cause structural damage, mold growth, and costly repairs. Thankfully, much of this damage can be avoided through proactive plumbing maintenance. By staying on top of small issues before they escalate, you can save yourself time, money, and a lot of stress. Here’s how to prevent costly water damage restoration through regular plumbing upkeep.
1. Regularly Inspect Pipes for Leaks
Leaks are often the culprit behind water damage in homes, especially when they are hidden behind walls or under floors. They can go unnoticed for months or even years, slowly causing damage to the surrounding structure and creating a breeding ground for mold.
-
What to Look For: Check visible pipes under sinks, in basements, or crawl spaces for any signs of moisture, rust, or corrosion. Listen for the sound of dripping or running water.
-
Tip : If you suspect a leak in a hard-to-reach area, consider using a moisture meter or calling a plumber for a more thorough inspection.
2. Know Your Water Pressure
High water pressure is a common, yet preventable cause of plumbing issues. Excessive pressure can stress pipes and fittings, leading to leaks or even bursts. On the other hand, low water pressure can indicate problems with your plumbing system, such as clogs or pipe damage.
-
How to Check : Use a water pressure gauge, which can be found at most hardware stores. Attach it to an outdoor spigot or laundry sink faucet to get an accurate reading.
-
Tip : The ideal water pressure for a home is between 40 and 60 psi (pounds per square inch). If the pressure exceeds 80 psi, consider installing a pressure-reducing valve to protect your pipes.
3. Inspect and Maintain Your Water Heater
A malfunctioning water heater can cause a lot of water damage if it leaks or bursts. Regular maintenance can help extend the life of your water heater and prevent issues like sediment buildup, which can lead to overheating and leaks.
-
How to Maintain : Check the temperature setting on your water heater and set it to 120°F to prevent excessive pressure buildup. Flush the tank annually to remove sediment and ensure it’s functioning efficiently.
-
Tip : Look for signs of corrosion or leakage around the base of the water heater. If you notice any issues, it’s time to call a plumber to inspect or replace the unit.
4. Clear Clogged Drains Regularly
Clogged drains don’t just lead to unpleasant odors—they can also cause backups and leaks that may result in significant water damage. It’s essential to keep your drains clear to prevent water from accumulating where it shouldn’t.
-
How to Prevent Clogs : Use drain screens to catch debris and hair. Regularly flush drains with hot water and a cup of vinegar or baking soda to break down grease and other buildups.
-
Tip : Never pour grease or oils down the drain. If you experience slow drainage, use a plunger or a drain snake to clear the blockage before it worsens.
5. Check for Proper Grading Around Your Home
Water should flow away from your home’s foundation to prevent pooling and seepage, which can lead to basement flooding and structural damage. Over time, soil can settle and cause poor drainage around your home.
-
How to Check: Inspect the landscaping around your home. Make sure the ground slopes away from your foundation by at least 6 inches over 10 feet. Look for areas where water pools after rain.
-
Tip : If you notice poor drainage, consider regrading the area or installing a French drain to redirect water away from your home.
6. Inspect Roof and Gutters
Clogged gutters and a damaged roof can lead to water entering your home, causing leaks, ceiling damage, and more. Keeping both your gutters and roof in good condition will prevent unnecessary water intrusion.
-
How to Maintain: Clean your gutters at least twice a year to prevent leaves and debris from causing blockages. Inspect your roof for missing shingles, cracks, or other damage that could allow water to leak through.
-
Tip: Pay attention to flashing around chimneys, vents, and skylights, as these areas are prone to leaks.
7. Check the Washing Machine and Dishwasher Hoses
The hoses connected to appliances like washing machines and dishwashers are often overlooked but can be the source of serious water damage if they burst or leak.
-
How to Inspect : Examine the hoses for any signs of wear, cracks, or bulging. If your hoses are over 5 years old, consider replacing them with more durable braided stainless steel hoses.
-
Tip : Turn off the water supply to the washing machine and dishwasher when not in use to reduce the risk of a burst hose.
8. Install a Water Leak Detection System
In addition to regular inspections, installing a water leak detection system can provide peace of mind. These systems use sensors to detect water where it shouldn’t be and can alert you immediately if there’s a leak, potentially preventing severe damage.
-
How It Works : Leak detection systems are typically placed in areas like the basement, under sinks, or near the water heater. If they detect unusual moisture, they send an alert to your phone or activate an automatic shut-off valve to stop the water supply.
-
Tip: Some systems are easy to install yourself, while others may require professional installation. Research different options to find one that fits your needs.
9. Maintain Sump Pumps and Sewer Backflow Preventers
In areas prone to flooding or where you have a basement, sump pumps and sewer backflow preventers are essential to prevent water damage. Regular maintenance ensures these systems will work when you need them most.
-
How to Maintain : Test the sump pump regularly by pouring water into the pit to ensure it activates. Clean the pump and check the discharge pipe to make sure it’s not clogged. Similarly, inspect sewer backflow preventers for any signs of wear or damage.
-
Tip : If your sump pump is more than 10 years old, consider replacing it with a newer model to ensure reliability.
10. Schedule Regular Professional Inspections
While many of the above tasks can be handled yourself, it’s a good idea to have a licensed plumber inspect your plumbing system every few years. A professional can catch issues you might miss and provide expert recommendations for preventing water damage.
-
How to Schedule : Contact a local plumber to schedule an inspection of your pipes, water heater, sump pump, and other critical plumbing components.
-
Tip: Ask your plumber to conduct a comprehensive inspection to check for any potential weak spots that could cause future water damage.
Conclusion
By investing a little time and effort into regular plumbing maintenance, you can significantly reduce the risk of costly water damage restoration issues. Whether it’s inspecting pipes, maintaining your water heater, or cleaning your gutters, small proactive measures can save you from big headaches down the road. Stay vigilant with your plumbing system, and you’ll be able to enjoy your home without worrying about expensive water damage repairs.