I get commissions for purchases made through links in this post.
A running toilet can be a frustrating and wasteful problem to deal with. Not only does it create an annoying noise, but it can also lead to higher water bills if left unchecked. Fortunately, this is a repair that most homeowners can tackle on their own with a few simple tools and a bit of patience. Here’s a step-by-step guide to help you fix a running toilet and get your bathroom back to normal.
Step 1: Identify the Problem
Before you start the repair, it’s important to identify what’s causing the toilet to run. There are a few common culprits:
- Flapper Valve Issues : The flapper valve is the rubber valve at the bottom of the tank that controls the flow of water into the toilet bowl. If it’s not sealing properly, water will continuously flow into the bowl.
- Float Problems : The float controls the water level in the tank. If it’s too high or too low, it can cause water to constantly flow into the overflow tube, keeping the toilet running.
- Fill Valve Issues : The fill valve refills the tank after flushing. If it’s faulty, it may not shut off properly, causing water to run.
Step 2: Turn Off the Water Supply
To avoid any potential flooding, turn off the water supply to the toilet. You’ll find the shutoff valve behind the toilet, near the floor. Turn it clockwise to stop the water flow.
Step 3: Remove the Toilet Tank Lid
Carefully remove the lid of the toilet tank and set it aside in a safe place. This will give you access to all the internal components.
Step 4: Check the Flapper
The first thing to check is the flapper. If it’s damaged, warped, or not sealing properly, it won’t close tightly and will let water leak into the bowl.
- If the flapper looks worn or damaged, it’s best to replace it. You can buy a replacement flapper at any hardware store.
- To replace the flapper, unhook it from the chain and remove it from the pegs inside the tank. Then, install the new one by hooking it onto the pegs and adjusting the chain to ensure it’s the right length.
Step 5: Check the Float
Next, check the float. The float controls how much water fills the tank. If the float is set too high, it will allow water to continuously flow into the overflow tube, making the toilet run.
- Adjust the float by either bending the arm (if you have a traditional ball float) or adjusting the screw on the fill valve (if you have a more modern float system).
- If the float seems damaged or is not adjustable, you may need to replace the fill valve entirely.
Step 6: Inspect the Fill Valve
If the flapper and float seem to be functioning properly, the next thing to check is the fill valve. Over time, the fill valve can become clogged or wear out.
- To check the fill valve, remove any debris or mineral buildup that might be clogging it. You can use a small brush or cloth to clean the valve.
- If cleaning doesn’t help, you may need to replace the fill valve. This is a fairly simple fix and typically requires removing the old valve and installing a new one by following the manufacturer’s instructions.
Step 7: Test the Toilet
Once you’ve addressed the flapper, float, and fill valve, it’s time to test the toilet. Turn the water supply back on by turning the shutoff valve counterclockwise. Let the tank fill and check to see if the toilet stops running.
- If the problem persists, recheck the components to ensure they are properly installed and adjusted.
- If the issue is still unresolved, there may be a deeper issue that requires professional assistance.
Step 8: Replace Any Necessary Parts
If you discovered that any parts are beyond repair, it’s best to replace them. While most plumbing parts are inexpensive and easy to find, replacing worn-out parts can prevent future leaks and save you from higher water bills.
Conclusion
Fixing a running toilet is a relatively easy DIY project that can save you both time and money. By following these steps, you can address common issues like a faulty flapper, float, or fill valve. However, if the problem persists despite your best efforts, it may be time to call a plumber for professional assistance. Regular maintenance and prompt repairs can help extend the life of your toilet and keep it functioning smoothly for years to come.